DCN 8 Port Gigabit PoE++ Switch with 2 Gigabit RJ45 and 1 Gigabit SFP Uplink, DCN-PS-8P-GB280


Description:The DCN-PS-8P-GB280 is a Gigabit UPoE+ switch designed for SMB networks, offering 8 PoE ports with up to 90W per port and a 300W power budget. It delivers reliable performance for powering APs, PTZ cameras, VoIP phones, and other high-power devices while simplifying installation with combined data and power in one unit.

Model No: DCN-PS-8P-GB280

Key Features:

  • Complieswith IEEE 802.3af/at/bt Power over Ethernet end-span PSE
  • Up to 90W of IEEE 802.3af/802.3at/802.3bt devices powered
  • Supports PoE power up to 90 watts for 1-4 PoE port, 30 watts for 5-8 PoE port, all power up to 280W PoE budget.
  • PD alive check function
  • Each port supports 52V DC power to PoE powered device
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
  • Flow control for full duplex operation and back pressure for half duplex operation
  • Integrates address look-up engine, supporting 8K absolute MAC addresses
  • Automatic address learning and address aging
  • Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

 

Specification

Technical Specifications – DCN-PS-8P-GB280
Interface
RJ-45 Copper Ports 10 × 10/100/1000 Mbps
SFP Fiber Ports 1 × 1G SFP
UPoE+ Ports 4 × UPoE+ (802.3bt)
PoE+ Ports 4 × PoE+ (802.3at)
Power over Ethernet (PoE)
PoE Standards IEEE 802.3bt UPoE+
IEEE 802.3at PoE+
IEEE 802.3af PoE (backward compatible)
PoE Power Supply Type 1/2/4/5 (+), 3/6/7/8 (-)
PoE Power Output 15.4W per port (802.3af)
30W per port (802.3at)
90W per port (802.3bt)
PoE Power Budget 280W
PD Support (15W) 8 devices
PD Support (30W) 8 devices
PD Support (45W) 4 devices (Ports 1–4)
PD Support (60W) 4 devices (Ports 1–4)
PD Support (75W) 3 devices (Ports 1–4)
Performance Specification
Chipset Realtek
Packet Buffer Memory 1.2 Mb (dynamic)
Forwarding Mode Store-and-Forward (Full Wire Speed)
Bandwidth 24 Gbps
Packet Forwarding Rate 16.37 Mpps
MAC Address Table 8K
Jumbo Frames Up to 9K bytes
MTBF @ 25°C 121,136 hours
Latency – 100M Copper 8.314µs (64B), 8.412µs (1518B), 8.551µs (9216B)
Latency – 1G Copper 3.414µs (64B), 3.545µs (1518B), 3.628µs (9216B)
Latency – 1G Fiber 2.980µs (64B), 3.101µs (1518B), 3.179µs (9216B)
IEEE Network Protocols
IEEE 802.3i (10BASE-T)
IEEE 802.3u (100BASE-T)
IEEE 802.3ab (1000BASE-T)
IEEE 802.3z (1000BASE-SX/LX)
IEEE 802.3az (EEE)
IEEE 802.3af (PoE)
IEEE 802.3at (PoE+)
IEEE 802.3bt (UPoE+)
IEEE 802.3x (Flow Control)
Monitoring
LEDs Per Port: Speed, Link, Activity, PoE Mode
Per Device: Power
Physical Specifications
Dimensions 280 × 180 × 44.5 mm
Weight 1.6 kg
Power Requirements AC 100–240V, 50/60Hz
Power Consumption (Max) 300W (full load + max PoE)
Idle Power Consumption 8W
Fan Fanless
EEE (Energy Efficient Ethernet) IEEE 802.3az (Disabled by default)
Environmental Specifications
Operating Temperature -20°C to 50°C
Storage Temperature -20°C to 70°C
Operating Humidity Up to 90% RH (Non-Condensing)
Storage Humidity Up to 95% RH (Non-Condensing)
Altitude Up to 10,000 ft (3,000 m)
Electromagnetic Emissions and Immunity
CE Mark
FCC Part 15 Class A
VCCI Class A
EN 55022 / CISPR 22 Class A
EN 55024
C-Tick Class A
CCC
ICES-003 Class A
ANSI C63.4:2014
Safety Certifications
CB Mark
CSA (CSA 22.2 #950)
UL Listed (UL 1950)
EN/IEC 60950-1
AN/NZS 60950.1:2015
CCC
Warranty and Support
Limited Lifetime Hardware Warranty
Lifetime Technical Support (Phone, Email, 24/7 Online Chat)
Package Contents
Smart PoE++ Switch
AC Power Cord (C13 Connector)
Rack Mount Brackets & Screws
Rubber Protection Caps for SFP Ports
Installation Guide
User Manual

Additional information

Color

Black

Reviews

There are no reviews yet.

Be the first to review “DCN 8 Port Gigabit PoE++ Switch with 2 Gigabit RJ45 and 1 Gigabit SFP Uplink, DCN-PS-8P-GB280”

Your email address will not be published. Required fields are marked *

×